Archive for December 2016

CCNA & CCNP Training in Vellore | Gudiyatham

CCNA & CCNP Training in Vellore | Gudiyatham

Learn how to use CCNA® from beginner level to advanced techniques which is taught by experienced working professionals. With our CCNA Training in Chennai you’ll learn concepts in expert level with practical manner.


Upcoming Batches

StartsDurationDaysTime (IST)
05th Dec4 WeeksMon – Fri10:00AM – 11:30AM
10th Dec6 WeeksSat & Sun11:00AM – 2:00PM
12th Dec4 WeeksMon – Fri07:30AM – 09:00AM
17th Dec6 WeeksSat & Sun03:00PM – 06:00PM
19th Dec4 WeeksMon – Fri08:00AM – 09:30AM
24th Dec6 WeeksSat & Sun12:30PM – 03:00PM
26th Dec4 WeeksMon – Fri06:30PM – 08:00PM
31st Dec6 WeeksSat & Sun10:00AM – 01:00PM
02nd Jan4 WeeksMon – Fri08:00AM – 09:30AM
07th Jan6 WeeksSat & Sun04:00PM – 07:00PM
Schedule does not suit you, contact us now! | Want to take one-on-one training, contact us now!

CCNA/CCNP Course Syllabus

Networking concepts

  • Components of network – router, switch, hub, bridge etc
  • Types of Network – LAN, MAN, WAN, VPN, PAN & Content Network
  • Defining Network requirements – NIC- Ethernet (CSMA/CD)
  • 10/100/1000 mbps DUPLEX (Half/Full/Auto) – Connecting Media – Coax.
  • 10 base 2T – UTP/STP – CAT 1/2/3..
  • Straight through/cross crimping (only details no practical)
  • Fiber optics – Single/Multimedia
  • 100 Base TX/FX etc – wireless communication.
  • Ethernet cabling Standard.
  • Connecting Devices
  • Repeater – Hub – Switch – Bridge – Topology – Bus/Star/Ring

OSI – Model

  • 7 Layers – Communication between the Layers (Encapsulation & De-encapsulation) – PDU.
  • Layer 2 – MAC/LLC – 802.3/802.2 (SAP/SNAP) /Ethernet II – Frames
  • Broadcast/Collision domain – point of -Hub/Switch/Router
  • L4 – 3way handshake – windowing – and about – Connectionless
  • Packet size [64B (mini) to 1518B (Max)]

TCP/IP Model & Ipv4 Addressing

  • All Layers of TCP/IP Compound with – OS
  • Application Layer – TFTP/FTP/SMTP/TELNET/SNMP/DNS
  • Transport Layer – TCP/UDP – TCP Segment Format
  • 3 way handshake/windowing – UDP segment Format
  • Internet Layer
  • IP datagram format – Protocol No. – TCP 6 – UDP 17
  • ICMP – ARP – RARP
  • Introduction to IP addressing – Class A/B/C/D/E
  • Private IP address – First OCTET range etc.

Subnetting

  • Default Subnet Mask
  • Class C Subnetting & Practice no. given
  • Class B Subnetting & problems
  • Class A Subnetting & problems

Introduction to IPV6

  • Introduction
  • Host Address Assignment
  • Unicast, Multicast and other Special ipV6 Addresses
  • Configuring ipV6 Routing and Routing Protocols
  • Translations between ipV4 and ipV6
  • Summary

Basic of Router & Configuration

  • Selection of Router & Cabling a Route
    • When Router used – LAN with WAN connect – to connect networks of different IP
    • Different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
    • Cables used in different interfaces/purpose of interfaces
    • WAN interface cable – EIA/TIA – 232/449/530 – V.35 – X.21
    • Different CISCO series – modular/fixed – 10mbps/100 etc
    • Straight through between DTE & DCE

Different modes of operation & basic commands

  • Internal Components:
    • ROM – POST – BSL – ROM-MONITOR PRG – MINIIOS
    • Different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
    • DRAM -Running Config
    • NVRAM – Startup Config
    • Flash MEM – IOS
  • Different Modes:
    • ROM Monitor – Reboot Mode – Setup – Exec Model
  • Exec Mode
    • User -Privilege – Global – Sub-configuration mode
    • Syntax/command to switch between modes
    • Assigning IP address for -E0-S0-S1
    • Enabling/disabling – console/privilege / vty password
    • Mold – command
    • Show Config / start / run / version / flash
  • Basic commands practice
    • Changing between modes – (user-privilege- Global-etc)
    • IP address configuration-E0-S0-S1
    • Password – enabling – encrypting it
    • Practice – motd – show commands – editing commands
    • Assigning host name (for Router)
  • Advanced Commands
    • Register value – X2102 – boot field value/purpose ROM monitor made – password breaking 8th/6th/13th bit of register value importance
    • Boot system flash/network/ROM – config-register (Changing register value) – etc command purpose Booting sequence – Backup & Recovery – CDP
    • Practice an above commands as well as following
    • Telnet – [ctrl+shift+6]x – disconnect – sh users /Sessions
    • Clear lines resume – [hostname resolving in telnet domain Enabling/disabling etc – no practical for this alone]
    • Overview of Cisco SDM (Security Device Manager)

IP Routing

  • IP Routing, Static Routing & Default Routing
    • IP routing – static routing – default- dynamic routing
    • Providing clock rate to up the link after identifying DCE by “Sh controllers” command
    • Commands/syntax – Static/default routing
  • Static Routing & Default Routing
    • Practical-session for Static & default routing
  • Dynamic Routing and RIP
    • Dynamic Routing – IGP & EGP.
    • IGP – RIP-OSPF – EGRP – EIGRP
    • Classes of Routing Protocol – Distance vector – Link State – Balanced hybrid
    • Role of Routing Protocol – builds/updates/selects & Routes the packet
    • Soluting for Routing loops – Max. loop count – split horizon – Route poison Reverse – Hold down Timer
    • Features of RIP – distance vector algorithm – RIP V1/V2 – load sharing – metric (depends – loop count)
    • Metric value depends – loop count – Ticks – delay – Reliability – cost – MTU – Bandwidth
    • Command – Router RIP Network
    • Sh IP route
    • Timer value for RIP– Update/Invalid/ hold down/flush Timer
  • RIP
    • Dynamic Routing – RIP Practical
  • Dynamic Routing EIGRP & OSPF
    • Limitations of distance vector algorithm
    • Features of EIGRP and its operations
    • Configuring EIGRP – “Auto-redistribution”
    • Verify and troubleshooting EIGRP
    • Features of OSPF and its operation
    • Configuring single area OSPF
    • Verify and troubleshoot OSPF
  • Access List
    • Purpose/advantage of Access-list
    • IP [-for a host – for a network/sub network].
    • Std IP access-list – wild card calculation
    • Extd IP access list
    • Switch port ACL,.
    • Step involved in creating access list
    • Applying access list at the interface – (inbound/outbound)
    • Named access-list for IP
    • Access-list in Telnet sessiont
  • IP standard Access List
    • Practical on
    • IP Std access-list
  • IP Extended Access List
    • IP Extd access-list, named access lists
  • NAT
    • Implement, Verify & Troubleshoot NAT
      • Explain the Basic Operation Of NAT
      • Using (including CLI/SDM)
      • Practicals on Static NAT, Dynamic NAT and PAT
      • Troubleshoot NAT issues
  • WAN Technologies
    • WAN Technologies- Leased Line
      • Leased line
      • P to P communication
      • HDLC & PPP protocol-features
      • Enabling HDLC & PPP
    • PPP Link
      • PPP layer & its explanation/role
      • PAP/CHAP role
      • Configuring PAP/CHAP using commands
    • VPN
      • Describe VPN technology
      • Importance Of VPN
      • Benefits & Role
      • Impact & Components
    • Frame-Relay
      • Packet Switched Network
      • Virtual circuit – DLCI – Access-link – CRI – FECN – BECN – LMI
      • Enabling Frame-relay
      • Inverse ARP
      • Configuring frame-relay for
      • Mesh Network
      • Star Network
      • Combination of above two
  • Switching
    • Switching Operation and Configuration
      • Function –add-learning / Forward-filters the Frame / loop avoidance
      • Redundant path and its problems
      • Spanning Tree Protocol – purpose – its different state (blocking/listening/learning/forwarding)
      • Modes of operation of switch/Bridge
      • Port duplexing
      • Switch & hub – half duplex
      • Switch & Server – full duplex
      • CISCO catalyst switch 1912 & 1924 interface details
      • M/K/I modes
      • Basic and advanced commands
      • Enabling & configuring MAC address table
    • VLAN Configuration
      • VLAN – ISL – Trunking
      • Enabling Trunking
      • Assigning VLAN No. & name
      • Configuring ports to a specific VLAN
      • VTP purpose
      • VTP domain
      • VTP modes of operation
      • Switching Technologies (including VTP , RSTP , PVSTP, 802.1q)
      • Implement Basic Switch Security (including Port Security , Trunk access .etc )
  • Wireless LAN
    • Wireless Intro & Operation
      • Standards associated with Wireless Media (including WI-FI Alliance, ITU/FCC)
      • Ad-hoc mode, infrastructure mode
      • SSID, BSS, ESS
      • Basic Parameters to configure on a Wireless Network
      • Wireless Security Feature’s (WEP, WPA 1 / 2 )
      • Implementing Wireless Networks

CCNP – Route

CCNA Course Revision

  • Routers & Switches
  • Addressing
  • Routing and its Importance

Introducing EIGRP

  • EIGRP Capabilities and Attributes
  • Underlying Processes and Technologies
  • EIGRP Operation
  • EIGRP Tables
  • EIGRP Metric
  • Calculating the EIGRP Metric
  • Integrating the EIGRP and IGRP Routes

Implementing and Verifying EIGRP

  • Configuring Basic EIGRP
  • Using a Wildcard Mask in EIGRP
  • Configuring the ip default-network Command
  • ip default-network Command
  • Verify EIGRP IP Routes
  • EIGRP Configuration,Verify EIGRP IP Operations

Configuring Advanced EIGRP Options

  • Route Summarization
  • Configuring Manual Route Summarization
  • Load Balancing Across Equal Paths
  • Configuring Load Balancing Across Unequal-Cost Paths
  • Variance
  • EIGRP Bandwidth Use Across WAN Links
  • Configuring EIGRP Bandwidth Use Across WAN Links
  • WAN Configuration—Frame Relay Hub-and-Spoke Topology
  • WAN Configuration–Hybrid Multipoint

Configuring EIGRP Authentication

  • Router Authentication
  • MD5 Authentication
  • Configuring MD5 Authentication
  • Verifying MD5 Authentication
  • Troubleshooting MD5 Authentication

Using EIGRP in an Enterprise Network

  • Scalability in Large Networks
  • EIGRP Queries
  • EIGRP Stubs
  • Limiting Updates and Queries: Using EIGRP Stub
  • EIGRP stub Parameters
  • SIA Connections
  • Preventing SIA Connections
  • Graceful Shutdown

Introducing the OSPF Protocol

  • Link-State Routing Protocols
  • OSPF Area Structure
  • OSPF Adjacency Databases
  • Calculating the OSPF Metric
  • Link-State Data Structures

OSPF Packets

  • OSPF Neighbor Adjacencies
  • Exchanging and Synchronizing LSDBs
  • Maintaining Network Routes
  • Maintaining Link-State Sequence Numbers
  • debug ip ospf packet

Configuring OSPF Routing

  • Configuring Basic Single-Area and Multiarea OSPF
  • Configuring OSPF on Internal Routers of a Single Area
  • Configuring OSPF for Multiple Areas
  • Configuring a Router ID
  • Verifying the OSPF Router ID
  • Verifying OSPF Operation
  • The show ip route ospf Command
  • The show ip ospf interface Command
  • The show ip ospf neighbor Command

OSPF Network Types

  • Introducing OSPF Network Types
  • Adjacency Behavior for a Point-to-Point Link
  • Adjacency Behavior for a Broadcast Network Link
  • Selecting the DR and BDR
  • Adjacency Behavior for an NBMA Network
  • OSPF over Frame Relay Configuration Options
  • Sample Configuration of a Router Using OSPF Broadcast Mode
  • OSPF over Frame Relay NBMA Configuration
  • neighbor Command
  • OSPF over Frame Relay Point-to-Multipoint Configuration
  • Point-to-Multipoint Configuration
  • Using Subinterfaces in OSPF over Frame Relay Configuration
  • Point-to-Point Sub interface
  • Multipoint Sub interface
  • OSPF over NBMA Topology Summary
  • Tracking OSPF Adjacencies

Link-State Advertisements

  • OSPF Router Types
  • OSPF Hierarchical Routing
  • OSPF Virtual Links
  • OSPF Virtual Link Configuration
  • show ip ospf virtual-links Command
  • OSPF LSA Types
  • Type 1
  • Type 2
  • Types 3 and 4
  • Type 5
  • Type 6
  • Type 7
  • Type 8
  • Types 9, 10, and 11
  • LSA Type 4—Summary LSA
  • Interpreting the OSPF LSDB and Routing Table
  • Interpreting the OSPF Database
  • Configuring OSPF LSDB Overload Protection
  • Changing the Cost Metric

OSPF Route Summarization

  • OSPF Route Summarization
  • Using Route Summarization
  • Configuring OSPF Route Summarization
  • Route Summarization Configuration at ABR
  • Route Summarization Configuration at ASBR
  • Benefits of a Default Route in OSPF
  • Default Routes in OSPF
  • Configuring a Default Route in OSPF
  • Default Route Configuration

Configuring OSPF Special Area Types

  • Configuring OSPF Area Types
  • Configuring Stub Areas
  • Configuring Totally Stubby Areas
  • Interpreting Routing Tables
  • Routing Table in a Standard Area
  • Routing Table in a Stub Area
  • Routing Table in a Stub Area with Summarization
  • Routing Table in a Totally Stubby Area
  • Configuring NSSAs

Configuring OSPF Authentication

  • Types of Authentication
  • Configuring Simple Password Authentication
  • Troubleshooting Simple Password Authentication
  • Configuring MD5 Authentication
  • Verifying MD5 Authentication
  • Troubleshooting MD5 Authentication

Operating a Network Using Multiple IP Routing Protocols

  • Using Multiple IP Routing Protocols
  • Defining Route Redistribution
  • Using Seed Metrics

Configuring and Verifying Route Redistribution

  • Configuring Redistribution
  • Redistributing Routes into RIP
  • Redistributing Routes into OSPF
  • Redistributing Routes into EIGRP
  • Redistributing Routes into IS-IS
  • Verifying Route Redistribution

Controlling Routing Update Traffic

  • Configuring a Passive Interface
  • Configuring Route Filtering Using Distribute Lists
  • Implementing the Distribute List
  • Defining Route Maps
  • Using route-map Commands
  • Implementing Route Maps with Redistribution
  • Defining Administrative Distance
  • Modifying Administrative Distance

DHCP (Dynamic Host Configuration Protocol)

  • Describing the Purpose of DHCP
  • Understanding the Function of DHCP
  • Configuring DHCP
  • Configuring the DHCP Client
  • Explaining the IP Helper Address
  • Configuring DHCP Relay Services

Explaining BGP Concepts and Terminology

  • Using BGP in an Enterprise Network
  • BGP Multihoming Options
  • BGP Routing Between Autonomous Systems
  • BGP Is Used Between Autonomous Systems
  • AS Numbers
  • Comparison with IGPs
  • Path-Vector Functionality
  • Features of BGP
  • BGP Message Types

Explaining EBGP and IBGP

  • BGP Neighbor Relationships
  • Establishing EBGP Neighbor Relationships
  • Establishing IBGP Neighbor Relationships
  • IBGP on All Routers in Transit Path
  • IBGP in a Transit AS
  • IBGP in a Nontransit AS
  • TCP and Full Mesh

Configuring Basic BGP Operations

  • Initiate Basic BGP Configuration
  • Activate a BGP Session
  • The BGP neighbor Command
  • Shutting Down a BGP Neighbor
  • BGP Configuration Considerations
  • Identifying BGP Neighbor States
  • Authenticating in BGP
  • Troubleshooting BGP

Selecting a BGP Path

  • Characteristics of BGP Attributes
  • AS Path Attribute
  • Next-Hop Attribute
  • Origin Attribute
  • Local Preference Attribute
  • MED Attribute
  • Weight Attribute
  • Determining the BGP Path Selection
  • Selecting a BGP Path
  • Path Selection with Multihomed Connection

Using Route Maps to Manipulate Basic BGP Paths

  • Setting Local Preference with Route Maps
  • Setting the MED with Route Maps
  • Implementing BGP in an Enterprise Network

Implementing IPv6

  • Introduction to IPv6
  • Describing IPv6 Features

Defining IPv6 Addressing

  • Describing IPv6 Addressing Architecture
  • Defining Address Representation
  • IPv6 Address Types
  • Multiple ISPs and LANs with Multiple Routers

CCNA & CCNP Training Reviews

Redback Academy Reviews given by our students already completed the training with us. Please give your feedback as well if you are a student.
Friday 23 December 2016
Posted by Redback Academy
Tag : ,

widget

Pageviews

Cloud Label

Blogumulus by Roy Tanck and Amanda Fazani

- Copyright © 2013 Redback IT Academy -- Powered by Redback - Designed by @ Redback Studio -